What You Need to Know About Asphalt Maintenance
If you're interested in learning more about Asphalt Maintenance, you've come to the right place. This article covers Preventative maintenance, Crack sealing, Sealcoating, and Overlaying. Hopefully, this article will answer any of your questions. And in case you have any more questions, feel free to contact us directly. Alternatively, you can read about these maintenance practices by reading our articles on paving. Here are a few tips:
Preventative maintenance
A pre-existing pavement is a great place to start with preventative maintenance. Performing regular maintenance on asphalt can help it last longer and prevent the need for expensive repairs later on. You can prepare a checklist of tasks for a regular asphalt maintenance schedule that you can follow to ensure the pavement looks good for as long as possible. There are many ways to maintain your pavement, so make sure you use it to its full potential.
One way to extend the life of asphalt pavement is to perform regular preventative maintenance. This will allow you to extend the life of your pavement structure, which can save you thousands of dollars over the course of ten years. You can learn more about the preventative maintenance process by contacting your city engineer or director of public works. You can also get the necessary supplies and tools for the work yourself. Preventative maintenance will help you save money in the long run, so it's well worth it to consider it before investing in a new pavement.
Crack sealing
In many cases, cracks are not completely sealed, allowing rain and moisture to seep through, eroding the base materials beneath the asphalt and causing potholes. Crack sealing slows the process of deterioration of the pavement by stopping moisture and preventing loss of aggregate. It can save a substantial amount of money over replacing the entire pavement. Here are some reasons to use crack sealing. Hopefully, these tips will prove to be helpful.
First, crack sealing is a long-term treatment. The best time to apply the material is when temperatures are moderate and the cracks are still small. Ideally, it should be applied when cracks are newly developed to maximize its effectiveness. In addition, crack sealing requires a minimum of two weeks to cure. Afterwards, it is recommended to use a de-tacking agent, such as liquid or fine sand, to prevent further damage to the surface.
Sealcoating
If you are in need of asphalt maintenance or repair, you might be considering the benefits of sealcoating. Sealcoat is composed of heated asphalt bitumen, which turns viscous when it dries. Asphalt bitumen is a by-product of crude oil that is used in road construction. However, synthetic tar substances do not require heating before they can be applied to asphalt. In order to apply sealcoating, your asphalt surface must be completely dry and free of all debris.
There are many benefits to sealcoating your asphalt surface. It will prevent cracks and maintain its luster. But, choosing the right sealcoat is essential to keep it looking great and functioning properly for years to come. While some types of sealcoat are better for driveways, asphalt emulsions are the best. They provide protection against traffic while preventing bitumen from oxidizing and becoming brittle. Another benefit of applying sealcoat is that they dry within three to four hours.
Overlaying
Overlaying asphalt is a way of extending the life of existing pavements without completely tearing them out. This process can add several years of useful service without detracting from aesthetics or functionality. The cost of overlays may offset the savings made by not replacing the original pavement. However, proper application can prolong the life of a pavement up to fifteen years. Here are some of the advantages of asphalt overlays. These benefits make this maintenance strategy a great option for a wide variety of applications.
Overlays are only applicable over existing asphalt. This means that you'll have to take a few measures before laying the asphalt overlay. Root damage, huge potholes, and other types of damage that can't be fixed by overlaying will require tearing the structure apart. Poor drainage also makes it difficult to apply an asphalt overlay. In such cases, the surface must be graded to allow water to drain away easily. Asphalt milling is another option, which is a method of removing the damaged upper layer of asphalt to allow for an overlay to be applied.
Ready to Get A Free Quote?
Our experienced team is standing by ready to start evaluating your unique project needs.
If you need